Advertisement
2. Water Supply does not stop and the washing process does not start either.
Water Supply does not stop.
Moisture in
water level
sensor hose?
NO
Water level
sensor hose
is bent?
NO
Unplug the power cord while
water supply keeps going on.
YES
Drain valve ON
and water out to
drain hose?
NO
Replace defective
PCB ASS`Y.
3. Water Supply does not stop but the washing process starts to operates.
Wash starts but water supply
not stop.
Water Level
Sensor terminal is
securely
connected?
YES
Washing is
going on?
YES
Replace defective
PCB ASS`Y.
YES
YES
YES
Check the drain
valve.
NO
NO
18
Air is leaking. Check the
sealed area and apply
adhesives on it.
Position the water level
sensor so as not to be bent.
Remove foreign materials
like threads, hair pin,
buttons, etc.
Connect terminals
securely.
Turn Power OFF and
starts to operate again.
Advertisement
