Advertisement
5-2-1 Troubleshooting - Control Panel
● Pressing the select switch does not give beep sound and the indicator does not turn on.
※ When in an ERROR mode, that is, when "E" shows in the display, pressing any key is not valid.
Turn POWER OFF and start again.
Unselected indicator turns on.
Power S/W ON?
YES
S/W contacts
in good
condition?
YES
Replace detective
PCB ASS`Y
Turn Power S/W ON.
NO
(All select switches are
valid only when the Power
S/W is ON.)
Defective contacts of
NO
TACT S/W. Replace
PCB ASS`Y.
16
Advertisement
