Fuel System Maintenance; Cleaning The Sediment Cup; Replacing The Fuel Filter - Toro MB-1600 Operator's Manual

Cleaning the Blower Housing (continued)
Operating the engine with dirty or plugged cooling fins and/or cooling shrouds
removed causes engine damage due to overheating.

Fuel System Maintenance

Cleaning the Sediment Cup

1. Move the fuel valve to the O
2. Remove the fuel sediment
.
3. Wash the sediment cup and O-ring in
nonflammable solvent, and dry them
thoroughly.
4. Place the O-ring in the fuel valve, and install
the sediment cup.
5. Tighten the sediment cup securely.

Replacing the Fuel Filter

1. Park the machine on a level surface, shut off
the engine, engage the parking brake, and
allow the engine to cool.
2. Rotate the lever for the tank-shutoff valve
forward and up to the O
3. Start the engine and run the machine until the
engine shuts off.
4. Rotate the engine switch
S position, and allow the engine to cool.
TOP
5. Remove the spark-plug wire.
3451-702A
IMPORTANT
position .
FF
cup and O-ring
position.
FF
clockwise to the
Page 5–10
G357295
g358124
Maintenance: Fuel System Maintenance