Bosch PSR 10,8 LI Original Instructions Manual page 32

OBJ_DOKU-26180-004.fm Page 32 Wednesday, August 20, 2014 11:55 AM
32 | English
emission may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also take into ac-
count the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the ef-
fects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product described un-
der "Technical data" is in conformity with all relevant provisions of the di-
rectives 2009/125/EC (Regulation 1194/2012), 2011/65/EU,
2014/35/EU, 2014/30/EU, 2006/42/EC. including their amendments
and complies with the following standards:
EN 60745-1, EN 60745-2-1, EN 60745-2-2 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen
GERMANY
11
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
20.08.2014
1 609 92A 0UN | (20.8.14)
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools