Advertisement
Keypad
= POWER
= "watch tv"- see CombiControl
= Enter"Setup"mode (when pressed & held for 3 seconds)
= "watch movie"- see CombiControl
= Enter"Copy"mode (when pressed & held for 3 seconds)
= BACK
= SKIP FORWARD
= FAST FORWARD (when pressed & held briefly)
= SKIP BACK
= REWIND (when pressed & held briefly)
= In TV Mode, text off
CombiControl
CombiControl allows you to to control 2 devices without having to select the corresponding device key. The functio-
nality of the two devices will be logically divided on the ONE FOR ALL keypad. CombiControl requires no additional
set up and will work automatically as soon as you set up at least 2 devices (e.g. a TV and a PVR).
Simply press "watch tv (= Setup key)" and the keypad will be configured as follows;
• AV, MUTE and VOLUME +/- keys = control your TV.
• ALL OTHER available keys = control your PVR.
• POWER (pressed for 3 seconds) = will send POWER signal to TV and PVR.
If additionally you also did set up a DVD (or Blu-ray) player on the DVD key; simply press "watch movie (= Copy key)"
and the keypad will be configured as follows;
• AV, MUTE and VOLUME +/- keys = control your TV.
• ALL OTHER available keys = control your DVD (or Blu-ray) player.
• POWER (pressed for 3 seconds) = will send POWER signal to TV and DVD.
TV
"watch tv"
TV
= Control
= Control
PVR
= Control
"watch movie"
TV
DVD
= Control
= Control
Copy
The Learning feature allows you to Learn (Copy) one or more functions from your original (working) remote control
onto your ONE FOR ALL remote.
1
2
3 sec.
1. Press and hold "Copy" for 3 seconds.
2. Select the device key (e.g. TV) for the device type
The LED will blink twice.
you wish to copy.
3. Example: How to copy the "I/II (mono/stereo)" function from your original remote onto the "red key" on your
ONE FOR ALL URC-6440 remote control. Place both remote controls on a flat surface. Make sure that the ends
you normally point at your device are facing each other.
3
URC-6440
Align both remotes also in height
First; Press the "red" key.
the LED will flash rapisly!
2 - 5 m
then; Press the "I/II" key.
• If you want to copy other functions, simply repeat step 3 for each key you want to copy.
• If you get a long blink, please repeat step 3.
• You can copy onto every key except the "Copy" key and "Device" keys (you will get a long blink).
PVR
4. Press and hold the "Copy" key for 3 seconds to exit the
+
4
Copy feature. The LED will light up twice. READY!
3 sec.
DVD
+
How to delete a COPIED function
1) Press and hold "Copy" for 3 seconds. The LED will blink twice.
2) Select corresponding device key.
3) Press the corresponding key (e.g. red key) you wish to delete for 3 seconds until the LED's blink twice.
4) Press and hold "Copy" for 3 seconds. The LED will blink twice.
Direct Code Set
- if "SimpleSet" is NOT successful
1
e.g. Bennett TV
1. Find the code for your device in the included Code list. Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your device is switched on (not on standby).
3
2
3 sec.
2 - 5 m
Original remote
2. Press and hold the "Setup" key for
3. Select the device key (e.g. TV) for
3 seconds. The LED will blink
the device type you wish to
twice.
control.
5
Problems & Solutions Direct Code Set
Your ONE FOR ALL controls your device but some keys don't work properly? There may be a better configuration
for your brand. Please repeat the Direct Code Set instructions with the next code listed for your brand.
If still NOT successful? Follow the Auto Search instructions or go to www.simpleset.com
Auto Search
- if "Direct Code Set" is NOT successful
1
2
3 sec.
1. Make sure your TV
2. Press and hold "Setup" for 3 seconds.
is switched on.
The LED will blink twice.
4
5
4
4. Enter the first 4-digit code listed
for your brand (e.g. 0556 for a
Bennett TV). The LED will blink
twice.
5. Now, aim the ONE FOR ALL at
your device and press POWER. If
your device switches OFF it
4. Press and release OK.
5. Point the remote at your device. Now the remote will send a different
should be ready to operate your
POWER OFF signal (automatically every 3 seconds) going through all the
device.
brands stored in the memory. Press and release OK as soon as your device
switches OFF. READY!
6.
If your device does NOT switch
OFF? Please repeat the Direct
Code Set instructions with the
Problems & Solutions Auto Search
next code listed for your brand.
Your device switched OFF but you still cannot control your device? Switch your device back ON manually (or
using the original remote) and repeat Auto Search making sure to press and release OK as soon as your device swit-
ches OFF.
Your ONE FOR ALL controls your device but some keys don't work properly? There may be a better configuration
for your brand. Please repeat Auto Search. Auto Search will select the next configuration for your brand. Make sure to
press and release OK as soon as your device switches OFF or go to www.simpleset.com
www.simpleset.com
New models and even brands are being launched every day. Fortunately your ONE FOR ALL remote can be updated
via the internet, ensuring it will never become obsolete. For access to over 6,000 brands and 300,000 models, please
visit our SimpleSet Online tool at www.simpleset.com
3
3. Select the device key (e.g.
TV ) for the device type
you wish to control.
max. 20
minutes
Advertisement
