Connecting An Idsl Line - Cisco 802 Installation And Configuration Manual

Connecting an IDSL Line

Always connect the yellow cable or Ethernet cable to the yellow ports on the router. Do not connect the
Caution
cable to an IDSL port or to a Network Termination 1 (NT1) device. Accidently connecting the cable to
the wrong port can damage your router.
Cisco 804 IDSL Router
Connect the red cable to the red IDSL port.
Step 1
Connect the other end of the cable to the IDSL wall jack. If your wall jack has an RJ-11 connector, attach
Step 2
the RJ-45-to-RJ-11 adapter cable to the red cable, and then connect the RJ-11 connector to the IDSL wall
jack.
78-10368-03
TO HU B
TO PC
C is co 80
ET HE RN
ET 10 BA 4 ID S L
SE T
CO NS OL
E
ID SL
1
2
3
4
+5 , -2 4,
-7 1 VD C
IDSL wall jack
RJ-45-to-RJ-11
adapter cable
Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers
Connecting Cables to the Router
9