1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. 802
  6. Installation and configuration manual

Cisco 802 Installation And Configuration Manual

Cisco systems idsl routers installation and configuration guide
Hide thumbs Also See for 802:
Table of Contents

Advertisement

Quick Links

Download this manual
Installing and Configuring Cisco 802 IDSL and
Cisco 804 IDSL Routers
Overview
Cisco 802 IDSL and Cisco 804 IDSL routers offer high-speed digital connections using an ISDN line
and support line rates up to 144 kilobits per second (kbps). Integrated Services Digital Network (ISDN)
Digital Subscriber Line (IDSL) expands DSL connectivity for customers who are outside the Service
Provider's range for DSL or for those who are unable to qualify for DSL connections.
This document describes the setup and configuration of your routers and contains the following sections:
•
•
•
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2005 Cisco Systems, Inc. All rights reserved.
Before You Start
Unpacking the Router
Connecting Cables to the Router
Configuring the IDSL Router

Advertisement

Table of Contents
loading

Related Manuals for Cisco 802

Summary of Contents for Cisco 802

  • Page 1 Cisco 804 IDSL Routers Overview Cisco 802 IDSL and Cisco 804 IDSL routers offer high-speed digital connections using an ISDN line and support line rates up to 144 kilobits per second (kbps). Integrated Services Digital Network (ISDN) Digital Subscriber Line (IDSL) expands DSL connectivity for customers who are outside the Service Provider’s range for DSL or for those who are unable to qualify for DSL connections.

  • Page 2: Before You Start

    Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Read the installation instructions before connecting the system to the power source. Statement 1004 Warning Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Cisco 804 IDSL Router Power supply...

  • Page 3: Preventing Electrostatic Discharge Damage

    Do not touch any exposed contact pins or connector shells of interface ports that do not have a cable Step 3 attached. 78-10368-03 ) appears above a port, you must not connect the Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Before You Start...

  • Page 4: Preventing Router Damage

    Desktop power supply • Power cord (black) • • Console cable (light blue) DB-9 to RJ-45 adapter (for use with light blue console cable) • Product documentation • Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...
  • Page 5 B A S E T C O N S O ID S L Cisco 804 IDSL Router Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Connecting Cables to the Router + 5, -2 4, -7 1 V D C...

  • Page 6: Connecting An Ethernet Device

    See the Cisco 800 Series Routers Hardware Installation Guide for straight-through cable specifications. The TO HUB/TO PC button corresponds to the Ethernet port on Cisco 802 IDSL routers and to • Ethernet port 1 on Cisco 804 IDSL routers.

  • Page 7: Connecting A Hub

    Check the LED corresponding to the connected port after router power-up: Step 3 The LINK LED is on the Cisco 802 IDSL back panel. • ETHERNET 1, 2, 3, and 4 LEDs are on the Cisco 804 IDSL front panel.

  • Page 8: Connecting A Server, Pc, Or Workstation

    Step 2 Check the LED corresponding to the connected port after router power-up: • The LINK LED is on the Cisco 802 IDSL back panel. ETHERNET 1, 2, 3, and 4 LEDs are on the Cisco 804 IDSL front panel. •...

  • Page 9: Connecting An Idsl Line

    4 ID S L SE T CO NS OL ID SL +5 , -2 4, -7 1 VD C RJ-45-to-RJ-11 adapter cable Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Connecting Cables to the Router IDSL wall jack...

  • Page 10: Connecting The Power Supply

    Power/Link Power To hub, server, PC, or workstation To IDSL network using IDSL port Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers TO HU B TO PC ET HE RN C is co 80 ET 10 BA...
  • Page 11 Step 10 router(dhcp-config)# exit router(config)# Define the IP addresses of the DNS servers. For example: Step 11 router(config)# ip name-server 172.29.20.41 router(config)# ip name-server 172.29.20.51 78-10368-03 Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Configuring the IDSL Router...
  • Page 12 1 interface bri0 overload router# access-list 1 permit 192.168.1.0 0.0.0.255 Save your configuration. Step 23 router# copy running-config startup-config Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...
  • Page 13 1 interface bri0 overload access-list 1 permit 192.168.1.0 0.0.0.255 line con 0 transport input none stopbits 1 line vty 0 4 cisco802# 78-10368-03 Example of Basic Configuration Output Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers...
  • Page 14 Step 13 Specify the subinterface point-to-point. For example: router(config-if)# interface bri0:1 point-to-point Specify the IP address on the subinterface. For example: Step 14 router(config-if)# ip address 209.188.2.2 255.255.255.0 Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...
  • Page 15 209.188.2.2 255.255.255.0 frame-relay interface-dlci 16 IETF ip nat outside ip nat inside source list 1 interface bri0:1 overload access-list 1 permit 192.168.2.0 0.0.0.255 78-10368-03 Example of Frame Relay Configuration Output Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers...
  • Page 16 The following table describes debug commands, problems your router might be experiencing, and solutions to the problems. An output example from each command appears after the table. Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...
  • Page 17 = 80 nr = 1 RRf sapi = 0 tei = 80 nr = 1 Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Troubleshooting Using Debug Commands Solution • Refer to troubleshooting information in Cisco 800 Series Routers Hardware Installation Guide.

  • Page 18: Obtaining Documentation

    These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/cisco/web/psa/default.html?mode=prod Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...

  • Page 19: Documentation Dvd

    Nonregistered Cisco.com users can order documentation through a local account representative by • calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS (6387). Documentation Feedback You can send comments about technical documentation to bug-doc@cisco.com.

  • Page 20: Cisco Product Security Overview

    PSIRT is the one that has the most recent creation date in this public key server list: http://pgp.mit.edu:11371/pks/lookup?search=psirt%40cisco.com&op=index&exact=on In an emergency, you can also reach PSIRT by telephone: • 1 877 228-7302 • 1 408 525-6532 Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers security-alert@cisco.com psirt@cisco.com 78-10368-03...

  • Page 21: Obtaining Technical Assistance

    Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227) EMEA: +32 2 704 55 55 USA: 1 800 553-2447 For a complete list of Cisco TAC contacts, go to this URL: http://www.cisco.com/techsupport/contacts 78-10368-03 Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers Obtaining Technical Assistance...

  • Page 22: Definitions Of Service Request Severity

    Press titles and other information, go to Cisco Press at this URL: http://www.ciscopress.com Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources.
  • Page 23 CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST,...
  • Page 24 Obtaining Additional Publications and Information Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...
  • Page 25 Obtaining Additional Publications and Information Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...
  • Page 26 Obtaining Additional Publications and Information Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers 78-10368-03...

This manual is also suitable for:

804

Table of Contents