Preventing Router Damage; Unpacking The Router - Cisco 802 Installation And Configuration Manual

Unpacking the Router

If cables are connected at one end only, do not touch the exposed pins at the unconnected end of the
cable.
This device is intended for use in residential and commercial environments only.
Note
Caution Periodically check the resistance value of the antistatic strap, which should be between 1 and 10
megohms (Mohms).

Preventing Router Damage

Use the following guidelines when connecting devices to your router:
•
•
If the symbol of suitability with an overlaid cross appears above a port, you must not connect the
Warning
port to a public network that follows the European Union standards. Connecting the port to this type
of public network can cause severe personal injury or can damage the unit. Statement 1031
Unpacking the Router
Your router package should include the following items:
•
•
•
•
•
•
•
•
Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers
4
Connect the color-coded cables supplied by Cisco to the color-coded ports on the back panel.
If the symbol of suitability ( ) appears above a port, you can connect the port directly to a public
network that follows the European Union standards.
Ethernet cable (yellow)
IDSL cable (red)
RJ-45 to RJ-11 adapter cable (for use with red IDSL cable)
Desktop power supply
Power cord (black)
Console cable (light blue)
DB-9 to RJ-45 adapter (for use with light blue console cable)
Product documentation
78-10368-03