Table of Contents
Advertisement
descaling and cleaning
DESCALE MODE
When you see the message
If you do not perform to 2 step of descale mode (cleaning and rinse mode), the descale
message does not disappear. Since then you operate the steam mode 2 more hours
after the descale message is displayed, the steam-related functions are limited.
1. Pour 500 ml mixed solution of descaler and
clean water in the water tank. Regarding
to mixing ratio, refer to the user manual of
descaler.
2. Close the lid of water tank before installing into
main unit.
3. Turn the MODE SELECTOR to "OFF" position.
4. Close the door and press and hold down
both END TIME and SELECT. The machine
displays 50 minutes and starts descaling.
• Cleaning Mode: 40 min
• Rinse Mode: 10 min
5. When it has progressed for about 40 minutes,
the machine displays "10:00" and stops
operating with a beep.
Remove the tank and empty any remaining
mixed water.
Wash the tank with water and fill up to the
maximum line with clean water.
Put it back into the main unit.
• When '10:00' is displayed, you have to operate the rinse mode within
25 minutes. If you do not, the set will be reset after 25 minutes and then
you will perform the descale mode again.
NQ50H7935ES_ET_DG68-00471H-01_EN.indb 54
on the display, the oven needs to be descaled.
English - 54
2014-10-23
11:35:07
Advertisement
Table of Contents
