Table of Contents
Advertisement
If there is too little water while cooking, you will see
the symbol
played. Add water into the tank and press START to
continue with the steaming.
• You can add water into the tank at any time while
cooking.
1) During cooking, COOK TIME and TEMPERATURE can be changed.
• Cooking time: press COOK TIME and then turn the MULTI-
• Temperature: press SELECT and then turn the MULTI-FUNCTION
2) In Steam mode settings, the steam heating elements switch off and on
throughout cooking to regulate the temperature.
3) Be careful when removing the plate as it is hot. First leave the door a little
open to allow the hot steam to escape. Pay attention to the steam outlets
as well.
4) When you have finished cooking, pour out the water in the drip tray and
empty the tank.
5) Dry the cooking cavity with a dry cloth if there is any remaining water.
6) The cooling fan (10 minutes) and drain pump (10 sec.) always work after
a steaming process. However, this is not a malfunction and you do not
need to worry about this.
Remove the remnant water.
1. After finish the steam mode, empty the water
tank and place it back.
2. Turn the MODE SELECTOR to the "OFF"
position.
3. Press CLOCK and STEAM LEVEL at the same
time and hold for 2 seconds. The oven starts
removing the remnant water and displays
20 seconds. Press the START button.
4. Remove the water tank and empty any remnant
water.
NQ50H7935ES_ET_DG68-00471H-01_EN.indb 24
in the display along with a beep being
FUNCTION SELECTOR.
SELECTOR.
English - 24
2014-10-23
11:34:57
Advertisement
Table of Contents
