Switching The Earbuds On - Sennheiser SPORT True Wireless Instruction Manual

Using the earbuds
24 | SPORT True Wireless

Switching the earbuds on

WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷
Before putting the headphones on, adjust the volume
to a low level (> 25).
▷
Do not continuously expose yourself to high volume
levels.
L
R
▷
Take both earbuds out of the charging case and insert them into
your ears (> 23).
If a paired Bluetooth device is within the transmission range, you
hear the voice prompts "Power On" and "Connected". The LEDs
of the earbuds light up blue.
If you take the earbuds out of the charging case during an
incoming call, the call is automatically accepted and you can
use the earbuds directly for making calls.
This Auto Call function can also be deactivated (> 29).
The earbuds automatically switch to idle mode if no paired
Bluetooth device can be found within 15 minutes. You can wake
up the earbuds from idle mode by touching their touch control
panels 1x or by briefly inserting them into the charging case.
The charging case automatically switches to a power saving
mode if the lid is open for more than 5 minutes. In power saving
mode, inserted earbuds are not detected or switched on/off
when they are removed/inserted.
Close the lid of the charging case and open it again to end
power saving mode.
"Power On"
"Connected"