Setting Up The Wireless-G Ip Phone - Cisco Lynksys WIP300 User Manual

Setting up the Wireless-G IP Phone

Before you begin, make sure you have an active Internet connection and the account information provided by your Internet phone service provider.
Note: The Phone automatically dims and turns off the LCD display when the Phone is not in use. If this happens while you are
configuring the Phone, press any key to turn the display back on and continue configuring the Phone.
1. Press the Power button to turn on the Phone.
2. Press the Menu Soft Key.
3. Scroll to Profile, then press the Navigation button to enter the Profile menu.
4. You see a message asking you to create a password. Press the Navigation button, then use the numeric keypad to enter a password.
Chapter 3: Installing and Using the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Wireless-G IP Phone
11