Table of Contents
Advertisement
INSTALLATION - SOLAR COLLECTORS
INSTALLATION ON A PITCHED TILE ROOF
This type of installation is not suitable for use on roofs over 10 m high.
This type of installation is not suitable for use in cyclonic areas.
WARNING
•
Attach the collector mounting straps to the
rafter or truss under the tiles.
•
Place the collector(s) onto the roof above the
lower rail. If more than one collector is being
installed then join them together using the
compression fittings supplied.
•
Push down on the collector retainers to clamp
the collector and tighten the nuts.
•
Position the upper collector rail above the
collectors. Push down on the retainers to clamp
the collector and tighten the nuts.
•
Attach the collector mounting straps to the
rafter or truss under the tiles.
•
Replace the tiles and ensure the collector is
secure.
Rinnai
Tile removed
Nail strap to rafter
Tiles removed
Nail strap
to rafter
16
DD FP Solar Pre Heat System OIM
Advertisement
Table of Contents
