- Cross Flow Fan Removal Procedure.
1. (Refer to No. 4 of Indoor Fan Motor the removal procedure)
Loosen the screw at the right side of the evaporator.
2. Pull the left side of the evaporator forward slightly and remove
the cross Flow Fan.
(B) Disassembly of the parts (Outdoor Unit)
- Inspection points for the Outdoor Electronic Controller
1. The Electronic Controller, Can be seen by removing the cabinet
Top plate and Front plate, as shown in the .
PDF created with pdfFactory Pro trial version
Fig. 6
Fig. 7
Fig. 8
58
www.pdffactory.com