Panasonic SA-DK3 Service Manual page 59

value.
4. Insert the CrO2 tape (QZZCRX).
5. Repeat step 2 and 3. / Standard value (Normal) : 19±4mV /
Standard value (CrO2) : 27 ±5mV
10.1.6. Erase Voltage Check
1. Set the unit to "AUX" position.
2. Insert the Normal blank tape (QZZCRA) into DECK2 and set the
unit to "REC" mode (use " REC/STOP" key).
3. Measure and make sure that the output is within the standard
value.
4. Insert the CrO2 tape (QZZCRX).
5. Repeat step 2 and 3. / Standard value (Normal) : more than 100mV
/ Standard value (CrO2) : more than 150mV
10.1.7. Adjustment Point
Fig.8
Fig.9
Fig.10
59