HP Vectra XU5 Reference Manual page 34

PCI LAN/SCSI-2 Controller
The LAN and SCSI-2 PCI devices are integrated in one chip.
The PCI LAN controller supports the Ethernet LAN protocol. An UTP (Unshielded
Twisted Pair) RJ-25 connector and a BNC coax connector are provided. The MAC
address is stored in an EEPROM. The LAN remote start code in the system ROM
allows the PC to start (boot) from either a Novell NetWare or LANManager server using
the integrated Ethernet interface.
High-performance single-chip Fast SCSI-2 controller with glueless interface to the PCI
local bus. The Fast SCSI-2 core provides an 8-bit SCSI interface supporting single-
endedSCSI with transfer rates up to 10 MB/sec. 32-bit memory transfers in burst mode
across the PCI bus at 132 MB/sec.
Vectra XU Technical Reference System Overview 34