If The Cd-Rom Drive Has A Problem - HP Vectra VE5 4 User Manual

WARNING
3 Troubleshooting Your PC
If Your PC Has a Hardware Problem

If the CD-ROM Drive Has a Problem

Be sure to disconnect the power cord and any telecommunication
cables from your computer before you remove the cover to check the
cable connections or jumper settings.
To avoid electric shock and harm to your eyes by laser light, do not
open the CD-ROM drive enclosure. The CD-ROM drive should be
serviced by service personnel only. Refer to the label on the CD-ROM
for power requirements and wavelength. This PC is a class 1 laser
product. Do not attempt to make any adjustment of the laser unit.
CD-ROM Drive Does Not Work
Check that the cables have been properly connected.
•
Check that a CD is inserted in the drive.
•
Verify that the CD-ROM is declared as "CD" in the Setup program
•
(refer to "IDE Devices Submenu (Advanced group)" in the HP Setup
program—see "Using the HP Setup Program", on page 44).
Verify that the
•
Local Bus IDE Adapters
Setup (refer to "IDE Devices Submenu (Advanced group) in the HP
Setup program—see "Using the HP Setup Program", on page 44).
If you intend to boot on CD-ROM, make sure that this option is
•
enabled in Setup (refer to "Boot Devices Security Submenu
(Security group)" in the HP Setup program—see "Using the HP
Setup Program", on page 44).
For further information refer to the manual supplied with the
•
CD-ROM.
CD-ROM Drive is Idle
If the CD-ROM drive does not appear to be working, try accessing the
disk by clicking on the CD-ROM drive icon or drive letter assigned to
the CD-ROM drive by your operating system.
56 English
item is set to in
Both