HP Vectra VE5 4 User Manual page 34

NOTE
2 How to Install Accessories In Your PC
Installing Memory
To install a main memory module:
1 Disconnect the computer's power supply cord and any connection to
a telecommunications network.
2 Remove the computer's cover (refer to page 19).
3 Align the memory module's connector with the slot's socket. Slide
the memory module into the slot at 90° to the system board.
The letters "A", "B", and "C" are used for reference only in the above
illustration. These letters do not appear on the system board. The bank
identified here as "C" is the one closest to the processor.
4 If you need to remove a main memory module, release the retaining
clip and pull the module forward and out of the socket.
5 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
6 Check the HP Summary Screen to verify the new configuration
(refer to chapter 3 for instructions on viewing the HP Summary
Screen).
24 English