Fluid Metering Assembly Overview
Electric Fluid Metering Assembly
The fluid metering assembly (Fig. 2) can be attached
to a robot arm, or mounted on a pedestal. Main com-
ponents of the fluid metering assembly are:
D PrecisionFlo metering valve (A )
D flow meter (B) to precisely measure the amount of
fluid dispensed and close the flow control loop
D solenoid air valve (C) that controls a dispense
device
D metering valve closer (D)
D solenoid air valve (E) that controls the metering
valve's closer
B
Fig. 2
D
A
C
E
TI1554A
PrecisionFlo Metering Valve
The PrecisionFlo metering valve (Fig. 3) is a precision
fluid pressure regulator that uses a magnetic linear
servo motor to regulate material pressure and flow.
The needle assembly is directly connected to the linear
servo motor, so the needle responds immediately to
any motor movement.
PrecisionFlo XL
Metering Valve
Fig. 3
TI1394A
309375
7