Setting Up Red Hat Enterprise Linux (Hp Workstations Only); Installing With The Hp Driver Cd; Installing And Customizing Red Hat-Enabled Workstations; Verifying Hardware Compatibility - HP Pro 3000 SFF Quick Setup And Getting Started Manual

Setting up Red Hat Enterprise Linux (HP Workstations
only)
HP offers an HP Installer Kit for Linux (HPIKL) to supplement Red Hat box
sets and help HP Linux customers customize their system image. The
HPIKL contains the HP driver CD and device drivers to successfully setup
up the Red Hat Enterprise Linux (RHEL) operating system, The HP Installer
Kit for Linux CDs are currently available for download at
http://www.hp.com/support/workstation_swdrivers.

Installing with the HP Driver CD

To install the HP driver CD, see "Installing with the HP Installer Kit for Linux"
in the HP Workstations for Linux manual at
workstation_manuals.

Installing and Customizing Red Hat-enabled Workstations

Linux-enabled workstations require the HP Installer Kit and the purchase
of a Red Hat Enterprise Linux box set. The Installer kit includes the HP CDs
necessary to complete the installation of all versions of the Red Hat
Enterprise Linux box set that have been qualified to work on an HP
workstation.
To use the drivers in the HP Installer kit for Linux other than RHEL, you
must manually extract the drivers from the HP Driver CD and install them.
HP does not test the installation of these drivers on other Linux distributions
nor does HP support this operation.

Verifying Hardware Compatibility

To see which Linux versions have been qualified to work on HP
Workstations visit http://www.hp.com/support/linux_hardware_matrix.
4 Quick Setup & Getting Started
http://www.hp.com/support/
ENWW