Finding More Information; Before You Call For Technical Support - HP Pro 3000 SFF Quick Setup And Getting Started Manual

To force the computer off manually and bypass the "standby state," press
and hold the power button for four seconds.
On some models, you can reconfigure the power button to work in On/Off
mode by running Computer Setup. Refer to the Maintenance and Service
Guide (English only) for more information about using the Computer Setup
utility.

Finding More Information

The following publications are available on the computer hard drive. To
access the publications, select Start > All Programs > HP User
Manuals.
NOTE:
●
Quick Setup & Getting Started—Helps you connect the computer and
peripheral devices and set up factory-provided software; also includes
basic troubleshooting information should you encounter any problems
during initial startup.
●
Hardware Reference Guide—Provides an overview of the product
hardware, as well as instructions for upgrading this series of
computers; includes information on RTC batteries, memory, and
power supply.
●
Maintenance and Service Guide (English only)—Provides information
on parts removal and replacement, troubleshooting, Desktop
Management, setup utilities, safety, routine care, connector pin
assignments, POST error messages, diagnostic indicator lights and
error codes.
●
Safety & Regulatory Information Guide—Provides safety and
regulatory information that ensures compliance with U.S., Canadian,
and various international regulations.

Before You Call for Technical Support

WARNING!
voltage is always applied to the system board. To reduce the risk of
personal injury from electrical shock and/or hot surfaces, be sure to
disconnect the power cord from the wall outlet and allow the internal system
components to cool before touching.
If you are having problems with the computer, try the appropriate solutions
below to try to isolate the exact problem before calling for technical support.
8 Quick Setup & Getting Started
Not all of the publications listed are included on all models.
When the computer is plugged into an AC power source,
ENWW