HP Kayak XU04 Supplementary Manual page 57

2 Insert the CD-ROM containing the HPIEDIAG utility in the CD-ROM
drive.
3 Make the CD-ROM drive the current drive by typing, for example,
if D is the letter of your CD-ROM drive.
D:
4 Change to the DIAG directory by typing:
5 Start the HPIEDIAG utility by typing:
the instructions on the screen.
Then check the configuration of the integrated Ethernet interface
using the Setup program. Refer also to the Network Administrator's
Guide preloaded onto your PC Workstation.
If Your PC Workstation Has an Audio Problem
If you encounter problems with the audio on your PC Workstation,
refer to the Using Sound guide preloaded onto your PC Workstation.
2 Troubleshooting Your HP PC Workstation
If Your PC Workstation Has a Software Problem
CD\LAN\DIAG
HPIEDIAG
.
. Follow
English 49