HP Kayak XU04 Supplementary Manual page 29

Completing the
Installation of an ISA
Accessory Board
NOTE
7 Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, remember to tighten
them.
Secure the board
in position
8 Install any other accessories before replacing the cover (see page 4).
Reconnect all cables and power cords.
If you have installed an ISA accessory board that uses an interrupt, you
must run the Setup program and reserve the IRQ for the accessory
board.
1 Turn on the PC Workstation and press
appears.
2 In the Setup program, select the
submenu. A list of IRQs and the devices that use them is
Exclusion
displayed. Highlight the IRQ field you want to change, for example
.
IRQ 11
3 You can use the space bar or press
reserved for ISA (
( ).
Available
4 Press to save any changes you made and exit the Setup program.
You should always leave at least one IRQ available for use by the
integrated PCI devices.
1 How to Install Accessories In Your HP PC Workstation
Advanced
) or make it available for PCI
Reserved
Installing Accessory Boards
when
Setup
menu and the
ISA Resource
or to make the IRQ
English 21