Installing The Hp Raid Device Manager - HP Kayak XU04 Installation And Configuration Manual

Installing the HP RAID Device Manager

After installing Windows NT 4.0 on your computer, continue by
installing the HP RAID Device Manager. You can use the HP RAID
Device Manager to provide configuration and performance information,
and to change array settings. For instructions on using the HP RAID
Device Manager, refer to the HP RAID Device Manager's online Help.
To install the HP RAID Device Manager:
1 Start Windows NT and either,
insert the HP RAID Device Manager Disk 1 in drive A, or
•
the Drivers and Utilities CD-ROM in the CD-ROM drive.
•
2 To continue the installation, either:
Select Run from the
•
, or
Use Explorer to find the
•
the CD-ROM and double-click on
3 Follow the instructions that appear on the screen.
4 When the installation is complete, reboot your computer. From the
Start menu, select
Device Manager tools. Select
The HP RAID Device Manager (the title bar displays "Adaptec CI/O
Workstation Array Management Software") monitors the configuration
and performance of your HP FastRAID system.
Be sure to install any other device drivers required by your system
configuration, including those from the Windows NT 4.0 Service Pack.
For more information, refer to the Windows NT installation notes
available from the HP's World Wide Web support site:
http://www.hp.com/go/kayaksupport/
You can also find more information on the HP Kayak XU/XW PC
Workstation Drivers and Utilities CD-ROM provided with your system
in the directory.
!INSTALL
menu, type
Start
\FASTRAID\CIO\DISK1\
setup.exe
HP RAID Device Manager
RAID Device Manager
and press
A:\setup.exe
directory on
.
to display the HP RAID
to start the program.
English English 9