HP Kayak XU04 Installation And Configuration Manual page 19

CAUTION
NOTE
Follow these steps to delete an array:
1 Select Disk Array Operations from the Main Menu.
2 Select
Delete Array
3 When the list of arrays appears, select the array you want to delete.
A warning appears if you select an array that has partitions. Do not
delete an array with partitions if it contains data you want to keep,
because any existing data will be erased. Be especially careful not to
select your boot array!
4 View information about the array and make sure you really want to
delete it. Press any key to continue.
5 Type to delete the array (or
y
6 When the message
continue.
The drives that were formerly part of the array can now be used as
stand-alone drives or as members of another array. Deleting an array
may change the boot order and the drive assignment of other arrays
and disks.
You can identify individual drives by blinking the drive lights while you
are running the HP RAID Device Manager software. Refer to the HP
RAID Device Manager Software online documentation for more
information.
16 English English
from the Disk Array Operations menu.
to cancel the operation).
n
appears, press any key to
[Array name] deleted