HP Kayak XU04 Installation And Configuration Manual page 18

NOTE
CAUTION
Making the Array Bootable
Follow these steps if you want your computer to boot from the newly
created array or if you want to change the boot order of existing arrays:
1 Select
Display Boot Order
Singles and Arrays window appears.
2 If the newly created array is listed as Unit 0 at the top of the list, no
changes are necessary; if it has some other unit number, highlight
the array name and press
3 Use the arrow keys to move the selected array to the top of the list.
Then press
4 When you are finished, press
You cannot use this procedure to change the boot order of a non-striped
SCSI disk drive (see the "Resolving Problems" on page 20 for notes on
booting from the Narrow SCSI BIOS). If you want to do this, create a
one-drive RAID 0 "array" from the disk.
Displaying Array Information
Follow these steps to display information about existing arrays defined
in your computer:
1 Select
Disk Array Operations
2 Select
Display Arrays
3 When the list of arrays appears, highlight the array for which you
want information and press
4 View the information that appears on the screen. This includes array
type and status, array size, and information about each disk in the
array.
5 Press any key to return to the Disk Array Operations menu.
Deleting an Array
All data is lost when you delete an array! Before you delete an array,
back up any data you want to keep.
from the Main Menu. The Boot Order for
to select it.
to deselect it.
to return to the Main Menu.
from the Custom Setup Main Menu.
from the Disk Array Operations menu.
.
English English 15