HP Kayak XU04 Installation And Configuration Manual page 11

16 When the Setup program has finished detecting storage devices,
press to configure additional SCSI adapters.
S
17 From the list of adapters, select
a custom driver.
18 Insert the Adaptec Array1000 driver diskette in drive A and press
.
19 Press
20 When the driver has finished loading, press
installing Windows NT.
21 At the prompt, re-insert Setup Disk 3 and press
22 Continue installing Windows NT following the on-screen
instructions.
23 When prompted, insert your drivers diskette into drive A and press
. When the driver has finished loading, you can continue
with the Windows NT installation. For more information, refer to
your operating system's documentation on your Drivers and Utilities
CD-ROM.
8 English English
Other
to select the Adaptec Array1000 driver.
and press
to continue
.
to install