Kohler Memoirs K-8333-0 Installation Instructions Manual page 8

5. Complete the Installation – 2-13/16" Drain
CAUTION: Risk of property damage. Verify that a watertight seal exists on all drain connections.
CAUTION: Risk of personal injury. The edges of drain flange openings may be sharp.
NOTE: The drain cover and gaskets are included in a small box located within the carton.
NOTE: Verify that there is no interference with the drain flange openings.
For Brass Installation: Apply sealant tape between the drain flange and the drain pipe to create a watertight seal.
For PVC Installation: Apply 100% silicone sealant between the drain flange and the 1-1/2" 11-1/2 NPSP adapter to
create a watertight seal.
For PVC Installation: Apply PVC glue between the 1-1/2" 11-1/2 NPSM adapter and PVC pipe to create a watertight
seal.
Install the drain flange onto the drain pipe.
Insert the drain clicker into the drain flange.
Insert the cap seal gasket and drain cover into the drain flange.
Press the drain cover several times to verify that the drain opens and closes properly.
If desired, apply a thin, continuous bead of clear or color-matched silicone sealant to the seam between the bath and
the finished floor.
Install the bath filler following the faucet manufacturer's instructions.
Close the bath drain.
Fill the bath to the overflow and check the drain connections for leaks.
1420044-2-A
Drain Clicker
Drain Cover
Cap Seal
Gasket
Drain Flange
Drain Pipe
8
Optional
Kohler Co.