Exiting From The Configuration Utility - HP Kayak XA User Manual

D-Disconnect
T-Read Write I/O
Timeout (sec)
S-Scan for Device at
Boot Time
L-Scan for SCSI LUNS
Q-Queue Tags
This option lets you enable or disable disconnects for the device.
To optimize SCSI bus performance, this option should be set to
Enabled when two or more SCSI devices are connected to the host
adapter. Set the option to Disable to achieve slightly better
performance when only one SCSI device is connected to the SCSI bus.
This option lets you enter a read write timeout value in seconds for the
device.
This option lets you specify whether the device is scanned for at boot
time. The choices are Yes or No.
More advanced SCSI devices can have several logical units (LUNs). This
option lets you specify whether SCSI LUNs are scanned for at boot time.
The choices are Yes or No.
This option lets you specify whether queue tags are enabled or disabled.
In a multitasking environment this option must be enabled. It should
only be disabled for troubleshooting.

Exiting from the Configuration Utility

To exit from the Configuration utility, press
of times to return to the Main menu, and then press
4 Technical Information
Using the SCSI Configuration Utility
the necessary number
to quit.
English 101