Remote Security Management - HP Compaq SP700 Reference Manual

3-24 Intelligent Manageability

Remote Security Management

Remote Security Management allows the system administrator to safely set or
modify security features on remote Compaq workstations, directly from the
centralized network management console. Enabling the system administrator to
perform these tasks remotely on multiple workstations, results in consistent
deployment of and greater control over workstation security parameters over the
network. It also results in greater productivity and lower total cost of ownership.
NOTE: Your workstation must be powered on or turned on through Remote
Wakeup to take advantage of Remote Security Management. Use of Remote
Security Management also requires an established Setup Password.
Remote Security Management is performed in two stages:
1. The system administrator uses the Remote Management Setup software
on a centralized management console to define the security parameters.
2. The system administrator uses a PC LAN management product to
distribute the settings over the network to remote Compaq workstations.
For more information about the Remote Management Setup software and
enabling Remote Security Management, refer to the online Remote Management
Administrators Guide. The Remote Management Administrators Guide is
included with the Remote Management Administration Tools and is available in
the Support Software CD Kit or at the Compaq website at www.compaq.com.