HP Compaq SP700 Reference Manual page 82

6-7
Internal Components
Continued
Ref. Component
3.5-inch, third-height drive bay, diskette drive, drive bay 7
Speaker with PremierSound and fixed equalization
Power supply
3.5-inch removable hard drive cage that supports either three 1.0-
inch drives or two 1.6-inch drives. Drive bay 1 on bottom, drive bay
2 in middle, and drive bay 3 on top.
Expansion board assembly (includes riser board, PCI expansion
slots, and ISA expansion slots)
System board (includes SW1 switch, AGP slot, 8 DIMM sockets,
two processor slots, and other connectors)
Accelerated Graphics Port (AGP) graphics controller (preinstalled on
selected models)
* An optional Zip drive can be installed in either bay.
Compaq Professional Workstation SP700 Reference Guide