Pinout Tables - Gemini 822 Series Installation And Use Manual

INSTALLER MANUAL

5.0 - PINOUT TABLES

5.1 - 20-PIN CONNECTOR
POSITION WIRE FUNCTION
- 1 - Door pin switch input (negative)
- 2 - Arming confirmation signal
- 3 - Disarming confirmation signal
- 4 - Positive/negative boot switch trigger
- 5 - Door switches negative trigger
- 6 - Electronic key receptacle input
- 7 - Electronic key receptacle g
- 8 - LED negative output
- 9 - LED positive output
- 10 -
- 11 - Door pin switch input (positive)
- 12 - Door pin switch input (configurable)
- 13 - Positive output with system armed (+A)
- 14 - External sensors negative trigger
- 15 - Bonnet switch n
Output - self-powered siren (lack of negative during alarm) or
- 16 -
optical pulse signals (Hazard)
- 17 - Comfort negative output
- 18 - Additional siren or horn negative output (negative output
during alarm)
- 19 -
Learn input and system arm/disarm via turn indicator flashes
- 20 -
WHITE-ORANGE wires must ALWAYS be connected if system is to operate via
!
5.2 - 8-PIN CONNECTOR
POSITION WIRE FUNCTION
- 1 -
- 2 - Siren output
- 3 -
- 4 - Turn indicators positive output
- 5 - Engine lock
- 6 - Siren output
- 7 - Engine block
- 8 - Turn indicators positive output
PAGE 06 - INSTALLER MANUAL
WIRE COLOUR
YELLOW-BLUE
GREEN-WHITE
GREEN-BROWN
round
Ignition BLACK marked "G"
WHITE-LIGHT BLUE
GREEN-BLACK
egative input
WHITE-BLACK
YELLOW-BLACK
Antenna
WHITE-ORANGE
the turn indicators.
WIRE COLOUR
Ground BLACK marked "M"
Positive BLACK marked "R"
BLACK marked "H"
BLACK marked "H"
Before starting any
disconnect the negative
!
Reconnect only after
YELLOW-RED
completing the wiring
GREEN-BLUE
ELECTRONIC KEY
GREEN
BROWN
BLACK
RED
RED-BROWN
Antenna, do not tamper
PINK
External sensor negative input
GREEN
BLUE
Door switch negative trigger
BLACK
Comfort negative output
Positive output with system armed (+A)
-----
ORANGE
-----
ORANGE
6.0 - WIRING DIAGRAM
electrical work,
battery terminal.
connections.
Green
Brown
Red
Black
BLACK
GREEN-BLACK
GREEN-BROWN
GREEN-WHITE
Boot switch input
WHITE-BLACK
PINK
YELLOW-RED
YELLOW-BLUE
GREEN-BLUE
RED-BROWN
WHITE-BLUE
See CDL diagrams
YELLOW-BLACK
Horn or additional siren
(negative output during alarm) GREEN
BLUE
Self-powered siren output
(P/N 7725, lack of negative
in alarm ) or optical pulse
signals (Hazard)
Connection
of unit 823
(with siren)
8
4 3 2
BLACK marked "R"
15A
+
POSITIVE
Battery
BLACK marked "M"
GROUND
ORANGE
ORANGE
Turn indicators output
BLACK marked "H"
BLACK marked "H"
8A
Engine block
MAX !
WHITE-ORANGE
Input - alarm operation
via turn indicator flashes
OPTIONAL
Bonnet switch
+30
BLACK marked "G"
Ignition
INSTALLER MANUAL - PAGE 07
5
1