Table of Contents
Advertisement
3 Set Up Computers and Software
Network Connection
•
The following procedures are explained using sample screens from Windows XP Professional.
•
Log on as an Administrator to install the software.
•
Make sure the machine is turned ON.
(See "Connect Power Cord and Turn on the Machine," on p. 9.)
•
Make sure the network cable is connected to the machine.
(See "Connect the LAN Cable," on p. 8.)
•
If you want to use the machine as a network scanner, it must be connected to a computer over
an IPv4 network.
•
Make sure an IP address is assigned to the machine.
(See "Network Settings," in the e-Manual.)
•
Click on the circled button on each screen to proceed to the next step.
Installation Procedure
1
Connect the machine to the network
correctly, and confirm that the power
is on.
2
Insert the UFRII LT/FAX User Software
CD-ROM.
–
If you want to install only the PCL
Driver (Color imageCLASS
MF9280Cdn only), proceed to step
37. For more information refer to
the Printer Driver Installation Guide
(located on the PCL/PS User
Software CD-ROM).
–
If you want to install only the PS
Driver (Color imageCLASS
MF9280Cdn only), proceed to step
37. For more information refer to the
Printer Driver Installation Guide
(located on the PCL/PS User Software
CD-ROM).
42
Before Installation
3
If the CD-ROM Setup screen is not
displayed, click [start] on the Windows
task bar → [My Computer].
Windows 2000: double-click [My
Computer] on the Windows desktop.
Windows Vista/7/Server 2003/Server
2008: click [Start] on the Windows task
bar → [Computer] ([My Computer]).
Open the CD-ROM icon, then double-
click [MInst] ([MInst.exe]).
If a language selection screen is
displayed before the CD-ROM Setup
screen, select a language and then
click [Next].
4
Make sure that the boxes next to the
UFR II Printer Driver, FAX Driver, Color
Network ScanGear and Manuals are
checked. Unchecked items will not be
installed.
–
If you want to install only the UFR II
Driver, select only the UFR II Printer
Driver in this step, then proceed to
the next step. For more information
refer to the Printer Driver
Installation Guide (located on the
UFRII LT/FAX User Software CD-
ROM).
–
If you want to install only the fax
driver, select only the FAX Driver in
this step, then proceed to step 16.
For more information refer to the
Fax Driver Installation Guide
(located on the UFRII LT/FAX User
Software CD-ROM).
Hide quick links:
Advertisement
Table of Contents
