Start "Setup Guide"
The "Setup Guide" assists you in setting up the machine before using it.
–
When you turn on the machine for first time, the "Setup Guide" automatically starts on the display.
–
Once the "Setup Guide" starts, it cannot be stopped.
–
If you turn off the machine while using the "Setup Guide, " turn on the machine and start the "Setup Guide" again.
–
Once you complete the "Setup Guide, " it does not start automatically when you turn on the machine.
–
You can restart the "Setup Guide" afterward from the user mode. (See "Change the Settings, " on p. 37.)
Information About the Keys
●
Press the Left/Right Any key to select the alternative key at the bottom of the display.
‒
Press [ ▼ ] [ ▲ ] [ ◀ ] [ ▶ ] to move the cursor position.
‒
Use
(Scroll Wheel) to move the cursor position.
‒
Press [OK] to set the entry or to proceed to the next screen.
‒
Press [Back] to return to the previous screen.
‒
* The Color imageCLASS MF9280Cdn is used for illustration purposes in this section.
1
Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
"Setup Guide. "
1 Settings Necessary to Use the Machines Functions
2
Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
"Setup Guide. "
The screen explains how to operate the "Setup Guide"
using the keys on the operation panel.
For details on the key operation, see "Information About
the Keys, " above.
11