Optional Paper Drawer - Canon Color imageCLASS MF9220Cdn Starter Manual

1 Settings Necessary to Use the Machines Functions
Optional Paper Drawer
When the Optional Paper Drawer is installed in the
machine, the procedure for setting up the Optional
Paper Drawer displays on the "Setup Guide. "
1
Pull out the optional paper drawer until it stops.
2
Hold the optional paper drawer with both
hands and remove it from the machine.
3
Press [OK] to proceed to the "Setup Guide. "
4
Hold the lock release lever of the side paper
guides (A) and slide the guides to the mark for
the size of the paper to be loaded. The side
paper guides move together.
Make sure to set the guides to the mark for the size of the
paper to be loaded correctly. If the guides are positioned
incorrectly, it may cause paper jams, dirty prints, etc.
16
5
Press [OK] to proceed to the "Setup Guide. "
6
Hold the lock release lever of the rear paper
guides (A) and slide the guides to the mark for
the size of the paper to be loaded.
IMake sure to set the guides to the mark for the size of the
paper to be loaded correctly. If the guides are positioned
incorrectly, it may cause paper jams, dirty prints, etc.
7
Press [OK] to proceed to the "Setup Guide. "
8
Fan the paper stack and even the edges.
9
Load the paper stack of the appropriate size
with the print side facing up. Align the rear edge
of paper stack with the rear paper guide.