Collate
2
Init. Printer Set
Reset Printer
2-10
Settings Menu
OFF*, COLLATE
You can choose from two features when collating printed matter.
Off
This setting prints all copies of the same page before printing the next page.
Collate
This setting prints all pages of each copy before printing the next copy.
OFF
*
, ON
The menu settings can be reset to the factory defaults by initializing the printer
settings.
If you select [ON], the settings are initialized. If you select [OFF], the settings you
selected are retained.
IMPORTANT
Do not turn OFF the machine while the settings are being initialized as this may
damage the machine's memory.
OFF*, ON
If you want to clear all print jobs in progress as well as data that has been received
in memory, you must reset the printer. Resetting the printer deletes print jobs in
the machine's memory and the print data that has been received by all interfaces.
NOTE
•
If the machine is being used on a network, please note that resetting the printer
may affect data being received from other users.
•
If you reset the printer, data may be deleted for print jobs that have already been
received, or received while the printer is being reset. However, in some cases, the
data is not deleted from the machine's memory, and the print job may not print
correctly. Canon recommends that you reset the printer to delete the data and print
the job again.