Canon imageCLASS MF3240 Series Advanced Manual page 49

Advanced Fax
Features 1
Copying Problems
Advanced Copy
Features
2
Cannot make copies.
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Q Have you removed the sealing tape from the
toner cartridge?
A Make sure you remove the sealing tape from the
cartridge. (See "Install Toner Cartridge," in the
Starter Guide.)
Q Is the toner cartridge installed properly?
A Make sure the toner cartridge is installed properly.
(See "Install Toner Cartridge," in the Starter Guide.)
A Make sure the front cover is fully closed.
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
Chapter 2, "Document Handling," in the Basic
Guide.)
Q Does the document meet the requirements for the
machine?
A Make sure you load documents that meet the
requirements for use. (See Chapter 2, "Document
Handling," in the Basic Guide.)
Back
The alarm sounds or <MEMORY FULL> appears in the LCD
when making copies.
Q Has an error occurred during transmission or
reception?
A Change to fax mode and check the LCD for an
error message. (See Chapter 11,
"Troubleshooting," in the Basic Guide.)
Q Is the machine's memory full?
A Change to fax mode and check if the memory is not
full.
TOP
Previous Next
5-13