Easy Mode - Canon PowerShot SX260 HS User Manual

Easy Mode

In Easy mode, on-screen instructions help you shoot. To prevent mistakes,
all controls except the zoom lever, the movie button (p. 56), and the buttons
mentioned on this page are deactivated. Even beginners can feel confident
about shooting or viewing images on the camera.
Shooting
Viewing
Still Images
Set the mode dial to 9.
To shoot, follow steps 3 – 4 on p. 54. (Note
that the camera will not play any sounds.)
To deactivate the flash, press the r button.
! is displayed on the screen. To activate the
flash, press the r button again. (
displayed.) The flash will automatically fire in
low-light conditions.
Press the 1 button.
To browse through your shots, press the qr
buttons or turn the 5 dial.
To view a slideshow, press the m button.
Each shot will be displayed for about three
seconds. To stop the slideshow, press the
m button again.
To erase an image, choose the image, press
the p button, choose [Erase] (either press
the qr buttons or turn the 5 dial), and then
press the m button.
Movies
is
91