Canon PowerShot SX260 HS User Manual page 138

Other Settings
Deactivating Powered IS
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected results
when used for the stronger camera shake that may occur when shooting
while walking or when moving the camera to match subject movement. In this
case, set Powered IS to [Off].
• [Powered IS] settings are not applied when [IS Mode] is set to [Off].
Changing the Compression Ratio (Image
Quality)
Choose from two compression ratios, as follows:
For guidelines on how many shots at each compression ratio can fit on a
memory card, see "Specifications" in the Getting Started guide.
138
Follow the steps in "Changing the IS Mode
Settings" (p. 137) to access the [IS Settings]
screen.
Choose [Powered IS], and then choose [Off]
(p. 40).
Configure the setting.
Press the m button, choose
and choose the desired option (p. 39).
The option you configured is now displayed.
Movies
Still Images
(Super Fine),
in the menu,
(Fine).