Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
•
For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
Common, Convenient Features
Configure the setting.
Follow step 1 on p. 64 and choose [.
Once the setting is complete, [ is displayed.
Follow step 2 on p. 64 to shoot.
Choose $.
Following step 1 on p. 64, choose $ and
press the n button immediately.
Configure the setting.
Press the op buttons to choose [Delay] or
[Shots].
Press the qr buttons or turn the 5 dial to
choose a value, and then press the m
button.
Once the setting is complete, $ is displayed.
Follow step 2 on p. 64 to shoot.
65