Canon PowerShot SX260 HS User Manual page 47

Geotagging Images While Shooting
Camera location information (latitude, longitude, and elevation) can be added
as you shoot, for later reference (p. 149). This information also enables you
to see the shooting location of your still images and movies on a map, when
you use the included software (p. 2).
• The shooting date and time can be recorded when you have selected [GPS
Auto Time: On].
• Geotagging applies the initial camera location and shooting date and time, as
acquired when you begin shooting a movie.
• For movies made by using Movie Digest (p. 92), geotagging applies the initial
camera location and shooting date and time, as acquired for the first movie shot
that day.
Set [GPS] to [On].
Follow steps 1 – 2 on p. 45 to configure the
setting.
Shoot.
The still images and movies you shoot will
now be geotagged.
To review the location information (latitude,
longitude, and elevation) of your geotagged
still images or movies, see "GPS Information
Display" (p. 149).
Using GPS Function
47