Shooting With Servo Af - Canon PowerShot SX260 HS User Manual

• [Servo AF] (see below) is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
[AF-Point Zoom] on the 4 tab is not available.
•
e is not available.
•
• The camera can detect subjects even if you press the shutter button halfway
without pressing the q button. After your shot,
the screen.
• When shooting in
one second.
• If [Face ID] is set to [On], names will not display when registered people are
detected, but the names will be recorded in the still images (p. 148). However,
a name will display if the subject chosen to focus on is the same as a person
detected with Face ID.

Shooting with Servo AF

This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long as
you press the shutter button halfway.
f
mode (p. 125), press and hold the q button for at least
Configure the setting.
Press the n button, choose [Servo AF]
on the 4 tab, and then choose [On] (p. 40).
Focus.
The focus and exposure are maintained
where the blue AF frame is displayed while
you are pressing the shutter button halfway.
Shooting Range and Focusing
is displayed in the center of
Still Images
131