Display Images - Canon PowerShot SX260 HS User Manual

• It is not possible to connect the included interface cable or an optional
stereo AV cable at the same time as an HDMI Cable HTC-100.
Forcing the cables into the camera at the same time may damage the
camera or cables.
• Camera operating sounds are not played while the camera is connected to an
HDTV.
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
In this case, you will need to adjust some TV settings. For details, refer to the
TV user manual.
SX260 HS
SX240 HS

Display images.

Follow steps 3 – 4 on p. 199 to display
images.
Configure the setting.
Press the n button, choose [Ctrl via
HDMI] on the 3 tab, and then choose [Enable]
(p. 40).
Connect the camera to the TV.
Follow steps 1 – 2 on p. 200 to connect the
camera to the TV.
Display images.
Turn on the TV. On the camera, press the 1
button.
Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
Using Optional Accessories
201