Canon Color imageCLASS MF8050Cn Starter Manual page 14

2.
S et the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation
modes.
<Auto><Fax/Tel><Answer><Manual>
Do you want to use
this machine for fax
only (no telephone)?
<Yes>
<No>
No
Do you want to auto-
receive faxes and
answer phone manually?
<Yes>
<No>
No
Do you want to use
an answering machine
to answer the phone?
<Yes>
<No>
No
<Manual> mode is set.
→ Proceed to Step 3.
• Responds to both a telephone call and fax with
handset pickup.
• Rings when receiving a call or fax.
12
• Receives a fax automatically.
• Does not use the telephone.*
Yes
* If connecting with the telephone in auto receive mode, the telephone
rings when receiving a fax or telephone call. You can answer the
telephone while the telephone is ringing. To configure so that the
telephone does not ring, see "Incoming Ring" in the
• Receives a fax automatically.*
Yes
• Responds to a telephone call by picking up the
handset.
* An incoming call rings. To configure so that the incoming call does not
ring, see "Incoming Ring" in the
Yes
• Receives a fax automatically.
• Responds to a telephone call with the built-in answering
machine.
• Rings when receiving a call or fax.
<Auto> mode is set.
→ Proceed to Step 3.
<Fax/Tel> mode is set.
→ Proceed to Step 3.
e-Manual.
<Answer> mode is set.
→ Proceed to Step 3.
e-Manual.