•
Press
•
When this
function cannot be used in the current shooting mode or function setting.
, each press of the c button records white balance data (p. 74),
•
In
and the white balance settings also change to
Changing Playback Functions
You can adjust the settings in the 1 tab by pressing the 1 button (p. 48).
Selecting the Image that First Displays in
Playback
Changing the Start-up Image or Sound
In the 3 tab, you can change the sounds played for each camera operation
or set the start-up image that appears when the camera power is turned on.
Change Sounds
if you want to cancel a function.
symbol is shown on the bottom right of an icon, the
Select [Resume], then press the qr buttons
●
to select an option.
Last seen
Last shot
Select [Sound Options], then press the m
●
button.
Press the op buttons to select an option.
●
Press the qr buttons to change the sound.
●
Changing Playback Functions
Resumes with the image last
viewed.
Resumes with the most recently
shot image.
1
Preset sound.
You can register your sounds using the
2
supplied software (ZoomBrowser EX/
ImageBrowser) (p. 138).
.
137