Save The Edited Movie - Canon PowerShot D10 User Manual

* Editing
•
When [Overwrite] in Step 4 is selected, the unedited movie is overwritten
with the edited movie, erasing the original movie.
•
When there is not enough space left on the memory card, only
[Overwrite] can be selected.
•
If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
battery or the separately sold AC adapter kit (pp. 40, 140).
100
Even if you move
point, only the portion from the
nearest to the left will be trimmed
when is selected. Only the portion
from the nearest
trimmed when
●
The section selected with
section of the movie that remains after
editing.
Check the edited movie.
Press the op buttons to select
●
then press the m button. The edited
movie will play.
●
To edit the movie again, repeat Step 2.
To cancel editing, press the op buttons,
●
. After pressing the m
and select
button, press the qr buttons to select [OK],
and press the m button.

Save the edited movie.

Press the op buttons to select
●
press the m button.
Press the qr buttons to select [New File],
●
then press the m button.
The movie will be saved as a new file.
to a point other than a
to the right will be
is selected.
will be the
(Play),
, then