Changing Playback Functions
You can adjust the settings in the 1 tab by pressing the 1 button (p. 48).
Selecting the Image that First Displays
in Playback
Changing the Start-up Image or Sound
In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
Changing the Start-up Screen
146
Select [Resume], then press the qr buttons
●
to select an option.
Resumes with the most recently shot
Last shot
image.
Last seen
Resumes with the image last viewed.
Select [Sound Options], then press the m
●
button.
Press the op buttons or turn the  dial to
●
select an option.
Press the qr buttons to select a setting.
●
1
Preset sounds.
You can register your sounds using the supplied
2
software (ZoomBrowserEX/ImageBrowser) (p. 147).
Select [Start-up Image], then press the m
●
button.
Press the qr buttons to select a setting.
●
No start-up image.
1
Preset sounds.
2
You can register your images.