Registering Functions To The C Button - Canon PowerShot D10 User Manual

Changing Shooting Functions
•
In mode, you cannot set [3:2 Guide] or [Both].
•
Grid Lines will not be recorded on the image.
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
Changing the IS-Mode Settings
•
If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is fixed to a
tripod.
•
When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.

Registering Functions to the c Button

136
Select [IS Mode], then press the qr buttons
●
to select an option.
Image stabilization is always on.
You can confirm the result directly
Continuous on the display, which makes it
easier to check the composition or
focus.
Image stabilization is only active at
Shoot Only
the moment of shooting.
Image stabilization only counters
up and down motion. This option is
Panning
recommended for shooting objects
moving horizontally.
Select [Set c button], then press the m
●
button.
Press the opqr buttons to select the
●
functions to register, then press the m
button.
Pressing the c button will call up the
registered function.