Inserting The Battery And Memory Card; Insert The Memory Card - Canon PowerShot D20 Getting Started

Inserting the Battery and Memory Card

Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera (see
Camera User Guide).
Terminals
Waterproof
Seal
Check the card's write-protect tab.
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
Open the cover.
Slide the switch (
( ).
Insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
Batteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Be careful not to damage the waterproof seal
when inserting the battery.
Battery
Lock

Insert the memory card.

Insert the memory card facing as shown until
it clicks into the locked position.
Make sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Be careful not to damage the waterproof seal
Label
when inserting the memory card.
Initial Preparations
) and open the cover
13