Changing The Date And Time - Canon PowerShot D20 Getting Started

Initial Preparations
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose
choose

Changing the Date and Time

Adjust the date and time as follows.
• Date/time settings can be retained for about 3 weeks by the camera's built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, see
Camera User Guide), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 15 to set the date and time.
• Automatic date and time updating is possible using GPS (see Camera User
Guide).
16
by pressing the op buttons.
Access the camera menu.
Press the n button.
Choose [Date/Time].
Press the zoom buttons to choose the 3 tab.
Press the op buttons to choose [Date/
Time], and then press the m button.
Change the date and time.
Follow step 2 on p. 15 to adjust the settings.
Press the n button to close the menu.
in step 2 and then